Please
Note:
The load imposed on a sling leg increases as the angle of
the leg from vertical increases.
Account is taken of this fact when calculating working load limits. For example,
a 10mm two-leg sling to be used at an angle of 45º from the vertical (90º included
angle) will have a WLL 1.4 times that of a 10mm single leg sling when used
vertically, and not 2 times the single leg. That same working load limit applies
to all angles from 0º - 45º (0º - 90º included angle).
Where there is likely to be a need to use a sling at an angle greater than
45º from the vertical, the sling should have additional markings showing the
reduced WLL applying at angles from 45º - 60º from the vertical (included angles
from 90º - 120º).
Alternative method of rating.
An alternative method of rating may be used for a specific lifting application
where the angle at which the sling legs are disposed is predetermined.
This method allows greater working load limits at angles less than 45¾ from
the vertical, always assuming that the sling legs are disposed symmetrically
with each leg accepting an equal share of the load to be lifted.
For further details refer to your KUPLEX distributor. |